Last Updated: 07/08/2020
Flooded Basement Cleanup in Colchester Ct
Typically, a laminate floor is water damage resistant. Unfortunately, any amount of water can still destroy the laminate floor. A laminate floor is constructed of many sections that are locked together. The homeowner can do water damage repair without needing to take up the entire floor. Before any repairs can be done you need to dry the area that is wet. It needs to be completely dry. Once dry you can put down new laminated flooring in the sections that were damaged.
Water damage can happen to the laminated floor if a washing machine, refrigerator, or dishwasher leaks. Any standing water damage the floor of course. Once you have located what caused the water leak and fixed it, it is time to dry the flooring completely. To do this you can use a wet/dry vacuum or mopping. Which method is used depends on how much water there is. After you get all the excess water dried up, put a fan on the floor and turn it on to dry the flooring.
Water Removal Services in Colchester Ct
There are also a number of problems that are physically visible when severe damage has caused mold, such as eczema or blisters on the hands. There are many different types of mold that can occur in your home and not all of them will be from damage caused by the water. Different types of water damage will also cause the different types of mold. Black flood water damage is usually linked to the growth of black mold, which is more toxic. This can make it extremely difficult to create a form of medication to help those that are struggling with mold problems. While mold removal is possible, it is usually best to prevent it from occurring in the first place. This is done to ensure that the water damage is dried within the first 48 hours. You can also use a dehumidifier in your home to help to keep the area cool, since mold prefers warm and moist areas to grow. If your water damage cannot be repaired and dried within 48 hours then you should look at replacing it instead; this will save you a lot of money in the long run. With some items, the only thing that you can do when mold appears is replace it anyway. This is especially the case when it comes to carpets and drywall water damage.
As we have reviewed before, there are three categories of water defined in the IICRC S500, the industry standard for water damage restoration. These categories are determined by the originating source and content/contaminant level of the water. Here we will discuss Category 1 water, the cleanest of the group. Category 1 water originates from a sanitary source, and does not pose any substantial health risk to humans. Some examples of category 1 water include: potable drinking water or bottled water, tap water, water from a broken supply line, such as those bringing fresh water to your refrigerator, sinks, dishwasher, washing machine, and toilets. An important distinction to note is while the water entering the above sources is category 1, it may no longer be category 1 after leaving these fixtures or appliances. Water mitigation, dry-out and restoration of a category 1 water loss is fairly straightforward. Because it is from a sanitary source, we can often save most of the affected materials, as long as we are notified quickly after the loss occurs.
Find Your Service
|Disaster Cleanup Index|
|Basement Flooded Index|
|Flood Damage Cleanup Index|
|Water Restoration Companies Index|